Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE WPRB8050DOWW Washer Hub nut stuck on,  (Read 637 times)

Offline mdniswan50

  • Technician
  • Member Since: Dec 2015
  • Posts: 310
GE WPRB8050DOWW Washer Hub nut stuck on,
« on: January 23, 2021, 01:05:14 PM »

Will never try off again with Dremel tool and chisel.What is the trick to take off.I have the GE tool will not take off I tried 5 before.

Offline Pnwdad1981

  • Technician
  • Member Since: May 2020
  • Posts: 123
  • Country: us
  • Professional appliance tech for over a decade
    • Buy me a beer through paypal
Re: GE WPRB8050DOWW Washer Hub nut stuck on,
« Reply #1 on: January 24, 2021, 11:34:45 PM »
You are trying to go clockwise? Those are left handed threads. Usually what Iíve found since itís corse threads a lot of build up from scum and soap harden basically making a loctite. I try taking the nut off then on and repeat different directions to break up that crud. Usually 15 F words and the fore mentioned works.
🌲PNW Chris🌲