Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Need help for washing machine problems  (Read 178 times)

Offline Natosha Jacobs

  • VIP Member
  • Member Since: Jan 2021
  • Posts: 1
  • Country: us
Need help for washing machine problems
« on: January 18, 2021, 02:44:37 AM »

I have a F&P washer machine...MW512NZ 92194-A. I have three lights flashing. green, orange and red...numbers 3,6,8. total tally equals 37. what does that mean and how can it be fixed? can I fix it myself or do I need to ring F&P?

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 828
  • Country: us
    • Buy me a beer through paypal
Re: Need help for washing machine problems
« Reply #1 on: January 22, 2021, 06:07:59 PM »
Typical Bad Control Board


3. (00000011) Motor Controller Module Fault The Motor Controller Module has found a memory error. Primary Source - Motor Controller Module. Action - Replace Motor Controller

[/size]
[/size]Module. 6. (00000110) Motor Controller Module Fault The Motor Controller Module has received an incorrect signal from the pressure sensor. Primary Source - Motor Controller Module. Action - Replace Motor Controller Module.[size=78%]

[/size]Put Model # in Search Box and Search Control Board - buy it here or online with searching the part #[size=78%]

Offline Pnwdad1981

  • Technician
  • Member Since: May 2020
  • Posts: 72
  • Country: us
  • Professional appliance tech for over a decade
Re: Need help for washing machine problems
« Reply #2 on: January 24, 2021, 11:58:14 PM »
https://www.manualslib.com/manual/787840/Fisher-And-Paykel-Smartdrive-Phase-7.html?page=36#manual

Check the pump for the faults mentioned. Also note that the FP washers are notorious for pump faults that also take out the Main controls resulting in the main board and pump be replaced together if needed.
🌲PNW Chris🌲