I have an 8 year old Samsung Front Load Washer Model: wf455argswr/aa throwing Error Code: 3E
Basically, you start any cycle, it runs the drain pump, then locks the door, then there are 11 short bursts of water, then nothing for 5 minutes, then 11 more short bursts of water, then nothing for 5 minutes, then 11 short bursts of water, then it throws the 3E code.
So far I have replaced the hall sensor (DC31-0098A) and the PCB (DC92-010408) but the problem remains the same.
The wiring harness looks free from damage from the motor to the PCB.
The motor appears fine (no visible damage or anything) and ohms out at 11ohms on all 3 contacts and the drum spins freely.
What else could this issue be ?