Hello. I have an older, small ice maker (commercial), it's a scotsman CSE60A that seems to be running, but just isn't cooling at all.
I've just installed a Supco 3-1, as the water pump wasn't running, and everything appears to start, but the compressor seems to try and start every 1 minute or so. I really can't tell if it's running or not, but the maximum the outer casing of the compressor (where fan isn't hitting) gets to about 109 - 112*F
I measured that 3 tabs on the compressor, and they seem to ohm out correctly, where the sum of 2 measurements equals approximately the measurement of 1.
I've also measured from the prongs to the copper piping, it it's not shorted, I think this means the compressor is likely goood?
I'm thinking perhaps the thermistor or thermostat is bad?