Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsung Refrigerator Ice Maker Kit (PCB Issue)  (Read 306 times)

Offline Tsolis

  • VIP Member
  • Member Since: Sep 2019
  • Posts: 3
Samsung Refrigerator Ice Maker Kit (PCB Issue)
« on: November 15, 2020, 06:11:33 PM »

Alright guys I have a question regarding a Samsung ice maker service kit that I'm stumped on and can't find any information regarding.
Hoping one of you have possibly encountered this before.

Unit info : rf28hfedbsr/aa

Installed all components that came with the kit : New I/M assembly, Y-clips, new drain tube and sealed ice box.
If you look at the images, the issue I'm facing is the new pcb all Molex connections fix except for ONE the "DAMPER" Molex is is different.
Please see attached images -

PCB part # DA94-02679B is on the original and on the pcb that came with the kit -  (again everything is the exact same beside the "DAMPER" plugin

I have searched around everywhere and can not find any information or anyone that has came across this, and insight would be grateful thank you.