Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

« previous next »
Pages: [1]   Go Down

Author Topic: Ceramic type ignitor for gas dryer  (Read 453 times)

Offline Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 895
Ceramic type ignitor for gas dryer
« on: November 11, 2020, 03:30:49 PM »

 All of the gas dryers I have worked on over the last 8  or more years use an ignitor that is made of a ceramic material that is very brittle. A slight mishandling of these will result in breakage. Is there an alternate type of ignitor used for gas dryers on the market that is reliable and affordable ?
Logged

Offline DaleCaskanette

  • Technician
  • Member Since: Dec 2013
  • Posts: 270
  • Country: ca
Re: Ceramic type ignitor for gas dryer
« Reply #1 on: November 11, 2020, 04:46:53 PM »
Unfortunately no
Logged

Online Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 820
  • Country: us
    • Buy me a beer through paypal
Re: Ceramic type ignitor for gas dryer
« Reply #2 on: November 12, 2020, 07:21:20 AM »
You have to handle and install these with great care. I stopped using an impact gun and literally use a 1/4" ratchet wrench with short socket to install!
Logged

Offline Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 895
Re: Ceramic type ignitor for gas dryer
« Reply #3 on: November 17, 2020, 09:35:29 AM »
I also use a short handle ratchet to remove these when necessary. I recall seeing a  piezo electric ignitor on gas grills and wondered if that would work on a dryer but since it is only a momentary spark I am not sure . Any info about that type of device ?
Logged
Pages: [1]   Go Up
« previous next »