Hey everyone, I'm working on a Kitchen Aid gas slide-in range M/N: KGSC308LSS0 and the display panel is out. I removed all the wires & ribbon connectors from the power board (WP9782435 N/L/A as of 10/20) and reconnected them and the display came on. It only lasted 2 days and is out again now. The display panel is WP9782455, $329.00 but out of stock. All this time I will tell you that the oven still works, bake/broil etc. it's just that you can't see what the setting or temp is. The Tech sheet is #LIT9754241 & the wiring sheet is #LIT9754372 (of course N/L/A at Whirlpool) I don't know how to tell which one of these parts are bad or how to figure it out. If any of you have run into a problem like this and know what repaired it, please let me know. Also if you have this tech sheet please send me a copy so I can try to figure it out. Thanks for any help you can give me!!!
