This forum has been great for helping me with some fixes over the years - but now I am just stuck on new issues
I woke up on morning to find the fridge and freezer were warm - had to toss everything inside.
I noticed the fans were working, air was blowing. The coils were dry and the fan was working next to the coils.
I looked inside and the temp displays (3 digits each) displayed 555 555 - which I guess is part of the diagnostic mode. I don't know how it entered that mode.
After checking all over - I thought it was the main board (WR55X10656) so i purchased a new one, but I have the same issue.
I can scroll thought the different diagnostic modes but i can never get it to exit. It does react some what; if I go to 000 then it clicks off and is flashing. If I go up to 555 555 i can hear the relays click and the compressor humms, but not like it normally would. It seems like the main board is ok, but what's odd is I cannot get it back to normal operation, I tried setting it to 111 555 / 111 666 as I saw online, but it never exits. I tried unplugging for 30secons, 5 min, 10 min, overnight, nothing changes.
I am really puzzled at this one. Any advice on this issue? I have a new start relay and cap for he compressor coming in; if that doesn't work then I'm really lost!