Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore diswasher Model 665.13229N414  (Read 116 times)

Offline Joey Bullock

  • Technician
  • Member Since: Jul 2014
  • Posts: 221
Kenmore diswasher Model 665.13229N414
« on: September 21, 2020, 10:03:14 AM »

The user interface doesn't show the full LED segments and the dishwasher doesn't run through the cycles completely or properly.  How do you troubleshoot the determine whether the User Interface or Control Board is bad?  Thanks, Joey

Offline Dash

  • Technician
  • Member Since: Sep 2015
  • Posts: 79
Re: Kenmore diswasher Model 665.13229N414
« Reply #1 on: September 21, 2020, 05:13:05 PM »
Your dishwasher is a new style Whirlpool built unit.  To determine if the user interface is bad, with power ON unplug it from the computer and then shut the door.  If computer is good, drain pump should turn on.  If pump doesn't turn on, computer is bad.

Offline Joey Bullock

  • Technician
  • Member Since: Jul 2014
  • Posts: 221
Re: Kenmore diswasher Model 665.13229N414
« Reply #2 on: September 21, 2020, 08:41:11 PM »
I appreciate the tech info.  I'll give that a try.  Thank you!