Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Washer (LSQ9244EQ0) Makes A Lot of Noise  (Read 259 times)

Offline tosh9i

  • VIP Member
  • Member Since: Aug 2020
  • Posts: 1
Whirlpool Washer (LSQ9244EQ0) Makes A Lot of Noise
« on: August 06, 2020, 02:11:42 PM »


I have Whirlpool Washing Machine Model No: LSQ9244EQ0 . The problem is that when it spins, it makes a lot of noise. Also, while it's spinning, I can tell that it's coming from beneath the wash tub

*I checked the Motor Coupling. They were still in tact.
*I replaced the Agitiator Coupling.
*It's also leveled.
*I don't think that it's the Bearings because there's no noise when I spin it manually.
*The Springs are in tact.
*I'm pretty sure that there's no blockage due to coins or lint.

After doing all of those tests and more research, I figured that something must be wrong with the belt. However, I came across another post elsewhere that said that this washing machine doesn't have a belt. So, if it doesn't have a belt, then is there something similar, that could be causing all of that noise?