Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool WDT730PAHZ0 Tripping breaker  (Read 68 times)

Offline mrmfwilson

  • VIP Member
  • Member Since: May 2020
  • Posts: 1
Whirlpool WDT730PAHZ0 Tripping breaker
« on: May 15, 2020, 10:28:36 AM »

When I try and run the dishwasher it trips the breaker.  To try a brief test, I set the wash cycle to one hour wash.  This doesn't use the sani-sense or the heated dry.  The washer turns on and seems to try and start a couple of times then starts and blows the breaker.  From what I have read about different models it sounds like the inline heater or the pump may be bad.  How do you test the heater and pump?

Mike