I have a Kenmore Oasis 110.28032700 Washer. This machine has a balance problem. After reading the forum I decided to replace the suspension Rods. I also discovered that the Basket was not free to "float" Due to corrosion. I then replaced the Shaft and bearing assembly.
The basket now "floats" as it should. I ran the diagnostics everything looked good. I thought I was in the clear. However when I fired it up same problem. Unbalanced when it spins up. It starts at about 500 RPM. The unit shakes violently.
Do you folks have any suggestions ..... did I do something wrong?