Author Topic: Whirlpool double wall oven (Read 196 times)

Matzie66 · « **on:** March 03, 2020, 04:25:36 PM »

Oven is model#W0D93EC0AS05. Lady was using self clean & control panel got very hot.No error codes.Control panel
# W10864166 has been replaced but display is still blank.Thermal fuse also replaced. Any suggestions? Thanks

Caddy4343 · « **Reply #1 on:** March 10, 2020, 02:09:47 PM »

Did you check the power on the terminal block? One side could be out.

Matzie66 · « **Reply #2 on:** March 10, 2020, 05:41:53 PM »

Hi---Yes power is okay to main control board. Nothing to control panel. Customer
ordered his own main board.I,m sure that's where problem is. Will let you know
how he makes out. Thanks

Caddy4343 · « **Reply #3 on:** March 11, 2020, 08:41:20 AM »

Probably got a "great" deal on Amazon or Ebay. Most likely a returned or used bad part. I always buy from reliable suppliers but even that doesn't prevent the occasional bad new part. If there is a ribbon connector double check it for breaks and if it's connected correctly. Good luck.

Matzie66 · « **Reply #4 on:** March 11, 2020, 03:39:02 PM »

Hi
Thanks. Hoping too that main control board gets oven back working again

Matzie66 · « **Reply #5 on:** March 12, 2020, 10:54:42 PM »

Hi Customer replaced the main control board & oven is back up &
running. Always great news when an appliance is working again.
Thanks again for all your info.

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum