I was called out to look at this Mhw8630hw0 washer that "wont lock."
I started machine on drain/spin mode and can hear relays clicking but it never locked or advanced at all.
I removed the top panel of the washer but there's only a wiring diagram and no service manual.
I tried the 123 service mode sequence used on other maytag washers and it does go into service mode.
The error codes are F5 E2, F0 E2, F0 E5
I cleared the error codes.
I started a auto test mode and it displays 001 and the machine locked and started filling with cold water, the tub fills up way too far.
The machine then powers off with a chime without going to next step of auto test.
I restarted auto test and the machine drained out and refilled and shut off promptly again after overfilling.
My instinct tells me to replace the water level control first.
My parts supplier had to call maytag to find the part number because it's new and there's not even a parts breakdown available. They'll call me once they get thru and find the numbers.
If anybody has any experience with these or knows where to find the service sheet it would be a huge help.