Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: LG/Kenmore 795.74053410 Freezing, "Universal Compressor" installed, SW updated?  (Read 244 times)

Offline jasew503

  • VIP Member
  • Member Since: Feb 2020
  • Posts: 1

Hello!

I have a LG Manufactured Kenmore Elite 795.74053410 French Door Fridge with a newly installed compressor, dryer and charged system with software update performed by Jig.  Problem is, the fridge compartment is freezing everything, if let run for more than a couple hours, temps drop to -10'F.  This unit has dual evaporators, and I am wondering if something failed or was performed incorrectly during the compressor install/software update process.  All thermistors are within range and give an accurate reading, compressor seems to function fine.  Below are some details:

New LG Compressor installed model:  FLS075LANA
Control Board model:  EBR789406
Fridge Temp Thermistor reading at ~32'F: ~29.5k Ohms
Fridge Evap Thermistor reading at ~32'F: ~28.5k Ohms
Freezer Temp Thermistor reading at ~32'F: ~7.8k Ohms
Freezer Evap Thermistor reading at ~32'F: ~28.0k Ohms

Any ideas what could be causing this to freeze?

Any help would be greatly appreciated.  Thank you!

« Last Edit: February 11, 2020, 03:32:46 PM by jasew503 »