I have a LG Manufactured Kenmore Elite 795.74053410 French Door Fridge with a newly installed compressor, dryer and charged system with software update performed by Jig. Problem is, the fridge compartment is freezing everything, if let run for more than a couple hours, temps drop to -10'F. This unit has dual evaporators, and I am wondering if something failed or was performed incorrectly during the compressor install/software update process. All thermistors are within range and give an accurate reading, compressor seems to function fine. Below are some details:
New LG Compressor installed model: FLS075LANA
Control Board model: EBR789406
Fridge Temp Thermistor reading at ~32'F: ~29.5k Ohms
Fridge Evap Thermistor reading at ~32'F: ~28.5k Ohms
Freezer Temp Thermistor reading at ~32'F: ~7.8k Ohms
Freezer Evap Thermistor reading at ~32'F: ~28.0k Ohms
Any ideas what could be causing this to freeze?
Any help would be greatly appreciated. Thank you!