Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Quiet Partner II dishwasher  (Read 8763 times)

Offline tandem86

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 3
Whirlpool Quiet Partner II dishwasher
« on: January 16, 2009, 01:32:34 PM »

Dishes are not cleaning. I have checked the filter, grinding wheel, gets plenty of water and drains fast. My question is how much water should be in the tub when full ? I just noticed that when full, water accually is touching the heater element. If to high a level can you adjust it. Or any other ideas would be great.

Thanks
Tandem

Model Number: du1145xtpba

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool Quiet Partner II dishwasher
« Reply #1 on: January 16, 2009, 03:05:01 PM »
Your water level sound about right.
Make sure both spray arms are not blocked internally and they both rotate.

Here is a link to your service sheet. You may want to run a diagnostic to reset your sensor calibrations.

https://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%20W10130990.pdf
« Last Edit: January 16, 2009, 03:07:51 PM by jumptrout51 »
Take a Kid fishing.

Offline tandem86

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 3
Re: Whirlpool Quiet Partner II dishwasher
« Reply #2 on: January 16, 2009, 03:43:47 PM »
I'll do the diag testing this weekend and let you know any findings

Tandem