Would appreciate some insight.
I have a GSH22JSTESS refrigerator, S/N: SM210979.
Recently, it stopped cooling/freezing.
Lights were working.
I was able to hear a relay clicking, but nothing would engage - even after unplugging and waiting up to 30 minutes.
So I ordered a replacement board, WR55X10942 - which was recommended by several online retailers.
After replacing the board, the refrigerator turned on and everything works...
except that now the refrigerator side is too cold - freezing just about everything.
On the instructions, there is mention of certain models (based on serial number) needing the wire coming into pin 2 on the J1 connector cut.
Since my serial number doesn't meet those criteria, I did not cut anything. The pins on my J1 don't match the diagram in instructions anyway.
Does anyone have advice on what to do next?
I've attached a pic of connectors.