Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Thermal fuse reset  (Read 231 times)

Offline Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 776
Thermal fuse reset
« on: January 13, 2020, 04:46:15 PM »

In years past the thermal fuse used in dryer electrical circuits was a cylindrical metal item that was able to be reset electrically by a sharp rap on a hard surface.. It did work (sometimes). Many units now use a plastic encased thermal fuse. These are installed on the air handler tube on the back side of the drum. Some however still use the metal type usually installed on gas dryers . These usually are on the heat tube. Has anyone ever been to reset the metal tube type by submerging them in a deep freeze condition/solution ?

Offline tcarmen

  • Technician
  • Member Since: Dec 2018
  • Posts: 107
Re: Thermal fuse reset
« Reply #1 on: January 13, 2020, 08:11:15 PM »
I heard that it was possible but never got it to work.