Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool XXL MODULAR ICE MAKER, no water. no continuity from V to N  (Read 194 times)

Offline RAChase

  • VIP Member
  • Member Since: May 2018
  • Posts: 8

I Have a W10122576 ice maker that never gets water. Testing continuity at points v and N on Ice maker I have no continuity at all. Measuring continuity at solenoid the yellow is 270 ohms and the red is 193 ohms. Jumping L and V does nothing. I monitored voltage across V and N after jumping T and H, the voltage remains at approximately 14 VAC during the entire cycle. Looking at the wiring diagram its either an open connection in ice maker or a open wire/connector in harness. Has anyone ever had this?