Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsung DV56H9000EP/A2  (Read 510 times)

Offline Caddy4343

  • Technician
  • Member Since: Oct 2007
  • Posts: 257
Samsung DV56H9000EP/A2
« on: December 21, 2019, 10:39:07 AM »

On normal setting [and others] the display reads 58.  When it goes to 55 it jumps to 1 and shuts off 60 seconds later.  It will immediately restart so it's not a motor problem.  I cleaned the sensor bars with sandpaper but it didn't make a difference.  I think that it's the control board but I'm looking for a second opinion.  Has anyone else run into this problem?  I don't want to invest in a board unless I'm sure.  Thanks.

Offline Mayolito

  • Technician
  • Member Since: Apr 2012
  • Posts: 45
Re: Samsung DV56H9000EP/A2
« Reply #1 on: February 27, 2020, 11:24:28 PM »
I suggest check the capacitor that is on the moisture sensor connector (if it has, usually located next to the filter housing), and after check if the harness it has continuity up to the connector on the main board.