Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Rheem Gas Furnace Intermitant Blower Running  (Read 427 times)

Offline Normstorm

  • VIP Member
  • Member Since: Sep 2019
  • Posts: 5
Rheem Gas Furnace Intermitant Blower Running
« on: September 28, 2019, 08:42:45 AM »

Rheem RGTK09EZAJS Gas Furnace. Blower fan has turned on in middle of night even though T Stat set to "Auto". The first time I woke up to fan running non-stop and the "Cool/Off/Heat" on T Stat was set to "Off". The next two times it did same thing with T Stat in "Heat" position.
Heating cycle worked normal a couple of times each morning and the Blower turned off appx. 2 minutes after burners shot off. Only have had furnace on a few times in AM since afternoon is not needed yet due to mild temps outside.
Any ideas why this happens or what things to check first?  This model has a Circuit Board control and is a 2006 model year.
Thanks for any help.

Offline beaconservices

  • VIP Member
  • Member Since: Feb 2020
  • Posts: 1
  • Country: 00
    • Buy me a beer through paypal
    • Beacon Services & Appliances
Re: Rheem Gas Furnace Intermitant Blower Running
« Reply #1 on: February 28, 2020, 09:38:13 AM »
I am wondering if you ever found the solution for this. First, that model has a PSC motor so that rules out a ECM module doing things it shouldn't. You could have compromised control wiring, with the G terminal wire coming in contact with voltage. I can't imagine a blower board just randomly engaging it's blower relay without being told to.