Have already replaced bin thermistor and evaporator thermistor. Unit passes all service mode(diagnostics mode) tests except for 6 & 7. On 6 the off led never blinks, per test "it should blink when Evap thermistor reached 4.5 degrees" . Moving to 7 " on solid while heating and then blinking when evap thermistor reaches 52 degrees, blinks from the beginning constantly.
6. Compressor and Condenser Fan - Both kick on
7. Compressor and Hot Gas Valve
Is this the Hot Gas Solenoid or Hot Gas Valve? Or has the sealed system leaked?