Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Loose Hub  (Read 115 times)

Offline gtr

  • VIP Member
  • Member Since: Aug 2018
  • Posts: 20
Loose Hub
« on: November 04, 2019, 08:32:57 AM »

Whirlpool Model# WTW5000DW1 - I have tightened down the plate in tub two different times and it keeps coming loose!! Why??? Any ideas out there? Thanks

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 847
  • Country: us
  • No bull no excuses keep it simple
    • Appliance Repair
Re: Loose Hub
« Reply #1 on: November 09, 2019, 04:33:47 AM »
I've never come across that problem but you may try increasing the diameter of your screw. You may have may have stripped out screw hole in spin basket. I assume you're speaking of the six whole Hub that screws into the spin basket.

Online Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 697
Re: Loose Hub
« Reply #2 on: November 09, 2019, 03:25:45 PM »
When you get a screw that fits properly. use Loctite when you put them into the location and make sure it cures for an hour or so before using the machine.