Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool duet gas dryer not heating Model WGD72HEdw0  (Read 101 times)

Online Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 697
Whirlpool duet gas dryer not heating Model WGD72HEdw0
« on: November 06, 2019, 03:30:22 PM »

I was given this gas dryer for repair and need assistance from readers to help find the problem of no heat . This unit is a electronic  control model with several buttons on the front panel that react properly when pushed and the drum turns well with no problems. I have dismantled it and cannot find the cause of the problem . All thermostats and the thermal fuse  test OK. Their is no code indicated on the display and I cant figure out how to get this unit into diagnostic mode. The glow stick/igniter turns on when viewed thru the peephole on the side but no gas flows .It glows for a few seconds and then turns off. The solenoid coil (a one piece item as compared to older design 2 piece coils ) shows a resistance reading as it should be for the 2 prong connector side but not a correct reading for the 3 prong side.. Will this 3 prong solenoid coil side not reading correctly make the gas valve not allow the gas valve to function properly.?  HELP .

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1642
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool duet gas dryer not heating Model WGD72HEdw0
« Reply #1 on: November 06, 2019, 09:06:47 PM »
Read continuity, open replace. I don't use resistance readings. Seems pretty straight forward it's the coils.

Online Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 697
Re: Whirlpool duet gas dryer not heating Model WGD72HEdw0
« Reply #2 on: November 07, 2019, 05:02:31 AM »
Thanks for your input. That is my thinking also. One thing about the new Duet  design is the difficulty of taking the front cover off just to get at the guts. The older design has a 2 piece cover. A real PITA with about a million screws to work on this new one.