Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: New control board now wont wash  (Read 140 times)

Offline Lcont01

  • VIP Member
  • Member Since: Oct 2019
  • Posts: 1
New control board now wont wash
« on: October 28, 2019, 05:04:33 PM »

I have a ge front load machine I replace the control board because I could not do anything I had like 2 cycle that were selectable and the power and start buttons were totally random when they worked. But when it started it ran. I replaced the control panel and now the buttons all work but the load starts begins to fill with water then stops filling drains and turns off. Is there anything I can do or do I just have to return the control board?

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 700
  • Country: us
    • Buy me a beer through paypal
Re: New control board now wont wash
« Reply #1 on: November 13, 2019, 07:43:25 AM »
Please post Model number without that itís hard to diagnosis


Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 686
  • Country: us
  • Service Tech Since 1974
Re: New control board now wont wash
« Reply #2 on: November 13, 2019, 10:03:12 PM »
Most of the controls for the front load Ge washers need to be programmed in order to function. Did the board come with programming instructions? If not, follow Blaiser's suggestion and post the model number.