Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: How to Identify Broiler Igniter Leads  (Read 74 times)

Offline NoBodyUKnow

  • VIP Member
  • Member Since: Sep 2019
  • Posts: 1
How to Identify Broiler Igniter Leads
« on: September 28, 2019, 12:02:49 PM »

Hi Everyone,

I recently purchased a Kenmore Gas Range Model 911XXXXXX  Not sure exactly which model, because the label is damaged, but this is the manual

https://usermanual.wiki/Kenmore/91136665790.978328865/view

The broiler igniter will not glow. I am trying to determine if it is the igniter or the electronic control board.  I think I know how to test the igniter, and I can get to some of the wiring under the stove. I am trying to avoid pulling the stove out, because it is heavy. Also, I have it  way up on the adjustable feet and don't want to risk bending them.

I see wiring coming into a junction box and leaving the box underneath the oven (I've attached pics).  I'm trying to figure out where to test either the igniter or the board, to see which may be at fault.   



Hoping someone might offer some guidance.

Thanks!

NBUK