Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Ge GFE28Gmkbes RFID reset issues.  (Read 365 times)

Offline Repairs.pridehvac

  • VIP Member
  • Member Since: Jul 2019
  • Posts: 15
  • Country: 00
Ge GFE28Gmkbes RFID reset issues.
« on: September 23, 2019, 03:52:24 PM »

Need some info. I'm working on a GE that uses RFID filters. The original problem I found was that the main water valve had failed. I replaced that but afterwards the replace filter dispenser off popped up on the display. The filter is new and works for a few tries then shuts down. Anybody have any information on that?

Offline ScottyMo1

  • Technician
  • Member Since: Nov 2011
  • Posts: 208
Re: Ge GFE28Gmkbes RFID reset issues.
« Reply #1 on: October 04, 2019, 06:44:46 AM »
I have one doing the same thing. Customer replaced her filter, and now the dispenser stopped working, and shows dispenser off change water filter. I unplugged the unit, then the dispenser worked for a short time, then back to dispenser off. Model number GFE26GGKBWW.