Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsunng rf267abpn icemaker  (Read 239 times)

Offline Scott12

  • VIP Member
  • Member Since: Sep 2019
  • Posts: 1
Samsunng rf267abpn icemaker
« on: September 13, 2019, 08:45:12 AM »

I replaced icemaker module but now ice cube compartment is not cold enough to freeze water in ice mold into cubes. Fridge and bottom freezer temps are normal. Temp settings are at recommended levels.
I pushed reset button and it sounded like system started to work but it just allowed water in on top of existing water and naturally overflowed.
So basically, what is keeping the -4 freezer air from entering the icemaker compartment?