Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: RF28K9070SR Samsung 4 door not cooling  (Read 59 times)

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 685
  • Country: us
    • Buy me a beer through paypal
RF28K9070SR Samsung 4 door not cooling
« on: August 15, 2019, 07:12:42 PM »

Samsung RF28K9070S Refrigerator came to me with locked rotor (4 flashing lights on inverter board). So here is what I did.


Cut out old locked compressor  - No pressure or Freon when I cut it out.
Flushed system then blew out with Nitrogen.
Installed New factory OEM Samsung compressor NC1MV90ALP E01
Installed new Drier Filter with High Side valve
Blew out with nitrogen
Then.pulled a Vacuum - found leak in evaporator in lower right freezer compartment. - fixed leak in evaporator - had to braze hole in copper to aluminum fitting.
Checked leak with 250 psi Nitrogen check then pulled vacuum again. No Leak now!
Dropped in R134A Freon weight of factory spec of 6.88 oz. of Freon.


Refrigerator compressor comes on and stepper valve rotates but no cooling in fridge what did I miss? Why is it not cooling ?






Offline smart19777

  • VIP Member
  • Member Since: Jul 2019
  • Posts: 11
Re: RF28K9070SR Samsung 4 door not cooling
« Reply #1 on: August 15, 2019, 08:25:01 PM »
Did you check pressure? Perhaps you soldered the tubes when soldering and there is no freon circulation