Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: control panel seems loose  (Read 3215 times)

Offline habe

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
control panel seems loose
« on: January 03, 2009, 06:04:04 PM »

I just got this washer and the control panel seems loose on the left end as you face the washer.
How do I get the end covers off the check for loose or missing screws? They seem to be attached differently then on our old washer.

Model 110.28532701

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: control panel seems loose
« Reply #1 on: January 03, 2009, 06:27:28 PM »
The newer models have a sleeve over the screw. Some models have a screw in the rear on bote sides.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: control panel seems loose
« Reply #2 on: January 03, 2009, 06:29:22 PM »
NOTE: newer models have the screw Hidden
 
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair