Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Washer no hot water  (Read 3957 times)

Offline socal59

  • VIP Member
  • Member Since: Jul 2008
  • Posts: 1
Washer no hot water
« on: January 02, 2009, 09:18:32 PM »

Hello everyone. My Whirlpool washing machine model number LSQ8543JQ0 is malfunctioning when it fills with water. When I chose hot only there is no water, warm/cold cold water, warm/warm there is warm water. From what I gather I need this inlet valve kit. Like this one, Click Here  I appreciate your help. Thanks.

Model Number: LSQ8543JQ0 icon

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Washer no hot water
« Reply #1 on: January 03, 2009, 04:47:59 AM »
If you have warm water, the valve is not the problem, but please feel free to buy one just because you read it somewhere.


Common sense tells us that the hot side of the valve still works because there is a warm water mix. If it were a bad valve you would not get warm water, just cold only.

The little temperature switch on the control panel must send power to the valve to achieve hot, warm and cold temps. A technician would whip out his OHM meter and check the temp switch contacts using the handy diagram inside the control panel. It's all there.
« Last Edit: January 03, 2009, 04:58:07 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com