Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: updating old ge range  (Read 4179 times)

Offline yoyoyo1

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 1
updating old ge range
« on: December 29, 2008, 11:18:54 PM »

Hi, I have an old GE electric range that is probably at least 20 years old..works fine but because of how it was built into the island, i would just like toupdate some of the outside parts on it to make it look newer instead of buying and redoing whole kitchen island...do you know where i could find knobs and the silver trim control plate? model #jmc27goj3ad thank you

Model jmc27g0j3ad

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: updating old ge range
« Reply #1 on: December 30, 2008, 05:43:36 AM »
Parts for this model are generally no longer available, except for burner parts. The trim you asked about cannot be found.The knobs are still available ($28 each) if you can choke the cost from GE


Part # WB3X439

"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com