LSQ9549LG0 taking a walk

[peachy1]

First the washer is level. It only happens on high spin. If you are looking at the washer from the front the left side comes out about 4 inches.How do I remove the cabinet. On the console I have 2 hex screws 2 push tabs(on the back) and 2 philip heads screws seem to a  attach to the cabinet. What parts do you think I need!!!

Model Number: LSQ9549LG0

[rickgburton]

On the front of the console, remove the two phillips screws. Pull forward on the console and lean back out of the way. Disconnect the lid switch connector on the right side. Remove the two big clips on either side. Then tip the cabinet forward and it will come off. Look at the frame sides and you'll see two tabs that stick up near the legs ( two on each side ). The cabinet has four slots the tabs go into when putting it back on.