Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Frigidaire Front Load Washer  (Read 5899 times)

Offline Boo

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 1
Frigidaire Front Load Washer
« on: January 28, 2009, 10:34:53 AM »

Washer tub will not turn or spin. I found an electrical componet had fallen off the Spin Control Module, Frigidaire Part #134285700. The componet is a small black two prong part about the size and shape of a nickel, it has markings NTC 2.5 0328. I soldered it back on and the washer worked fine for two days then went out again. Checked the componet and the solder had melted again. Can't get it to work now. I think I need a new Spin Control Module but am not sure if it could be something further back in the circuitry causing the problem and I might be wasting money??


Model FWT645RHS0

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 369
  • Country: ca
Re: Frigidaire Front Load Washer
« Reply #1 on: January 28, 2009, 12:31:01 PM »
That part is a capacitor and it probably fell out because it overheated. You need a new speed control module.