Forum Index > Refrigerator & Freezer Repair

Ice Misses the Bucket

<< < (2/2)

This was a replacement unit but I finally solved the problem.  In front of the ice maker is a hinged cover plate that swings freely.  I realized that it was not vertical and in fact that perhaps the ice cubes were deflecting off the bottom of this cover plate and tumbling down the front of the freezer.  I decided to put some spacers to hold this cover plate as far forward as I could without interfering with the shutoff mechanism.  I used some wire nuts and duct tape to form some stand offs.  This seems to have resolved the problem finally. 



[0] Message Index

[*] Previous page

Go to full version