Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE leaving a lot of water after wash.GSD3360D35SS  (Read 309 times)

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 255
GE leaving a lot of water after wash.GSD3360D35SS
« on: July 27, 2019, 06:51:55 PM »

I replaced impeller kit, solenoid motor timer.Have not replace pump or float.Washing dishes great.Leaving bottom full of water..Drain OK.Clean inside.

Online manden

  • Technician
  • Member Since: Oct 2011
  • Posts: 321
Re: GE leaving a lot of water after wash.GSD3360D35SS
« Reply #1 on: July 28, 2019, 10:13:09 AM »
The pump should be OK if it is washing dishes OK.
The float does not effect the pump out it is just an overfill safety.

How do you know that the drain is OK?
Did you try to drain it into a pail etc.
Often the drain get plugged where the drain hose connects to the house plumbing.

Below is a link to a tech manual for GE water distribution perhaps it will be useful to you.
https://drive.google.com/file/d/0BzIiBNwRIV4NVVlGYk10cWpHQVk/view

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 255
Re: GE leaving a lot of water after wash.GSD3360D35SS
« Reply #2 on: July 28, 2019, 02:19:43 PM »
Drain hose clean not hook up to house.maybe new solenoid is defective I hear kick in.