Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: AWN311SP111TW01 with s/n 0906030554  (Read 157 times)

Offline Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 701
AWN311SP111TW01 with s/n 0906030554
« on: July 16, 2019, 12:37:57 PM »

The above Speed Queen washer  was found to have one of the 4 bolts holding the inner wash tub on to the center hub broken. In order to get this bolt stub out it will be necessary to remove the agitator and the splined plastic drive hub off the shaft. I was able to remove the agitator but the splined drive hub is almost impossible to get off the shaft. I know there is a special tool available for this purpose but am looking for advice on getting this item off w/o buying the special tool. As an alternative this washer is 10 years old  and this bolt has been broken for quite a while. What risk do I take in leaving it as it is ? Any input would be appreciated.