Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsung NX58H9950WS panel dead and door locked  (Read 406 times)

Offline MFDP

  • VIP Member
  • Member Since: Jul 2019
  • Posts: 1
Samsung NX58H9950WS panel dead and door locked
« on: July 08, 2019, 03:33:48 PM »

Samsung NX58H9950WS - was doing a self-cleaning cycle when the front panel went dead. Door is locked. Powered down at circuit breaker, waited 15 minutes, powered up - did not help.  Burners (gas) work. Is it possible to diagnose main control and/or high limit thermostat issues and fix without pulling unit out and removing back panel?  Do we have to remove the back panel in order to release the door if the electronic components are replaced?  Thank you!
« Last Edit: July 08, 2019, 03:41:06 PM by MFDP »