I am not sure if the Samsung parts are similar to older Maytag parts. I have converted many Maytag units from LP gas to natural gas and vice versa. The typical kit requires 2 parts to be changed. The orifice plug and a relief plug. The orifice for natural gas is large a diamter and the orifice for LP gas is a smaller diameter. The natural gas valve uses a simple plug on the top and the LP gas version uses a relief type valve plug with a sliding plastic stem with a spring inside. A label is also to be affixed in the area of the valve and/or data plate showing a change has been made. I dont have any particular p/n's for the samsung but hope this helps.