Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag No Spin  (Read 186 times)

Offline gtr

  • VIP Member
  • Member Since: Aug 2018
  • Posts: 19
Maytag No Spin
« on: June 13, 2019, 10:42:39 AM »

Working on a Maytag Continental Washer Model# MVWC200XWO and it will wash then rinse but at rinse cycle it sets a long time then finally drains but it will not spin also noticed the lid lock did not lock but it does if you recalibrate it?????????? HELP PLEASE!!! Thanks!!!!!!!!

Offline johnboy3

  • Technician
  • Member Since: Nov 2012
  • Posts: 330
  • Country: us
Re: Maytag No Spin
« Reply #1 on: June 13, 2019, 01:23:26 PM »
What error codes does it show?  The way to diagnose these washers is first, extract and write down all error codes, Clear the codes,  then run it through the short, diagnostic cycle.  If it has not set any new codes, run the calibration cycle.  If it completes calibration, it may be good to go!  If after several washes a problem comes back see what the new code is and go from there following the mini manuals instructions for what test to do.