Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Ceramic cooktop board repair tips  (Read 9608 times)

Offline fitdano

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 1
Maytag Ceramic cooktop board repair tips
« on: November 10, 2008, 09:33:52 PM »

Element burnt out and since then the bake element won't work. I want to repair the board but I am looking for some insight as to what component might be damaged in the circuit board. Broil and cooktop works fine its just the bake element that does not work. Any suggestions on where to start or where I can get a schematic of this board??

Model PER5750QCW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Ceramic cooktop board repair tips
« Reply #1 on: November 11, 2008, 05:39:56 AM »
How have you determined that it is a board issue and not an open element?  The board you mention is an integral part of the clock and cannot be repaired. If it is the bisque colored face, the part number is 74009230

Here's the Technical Data Sheet for this model.
« Last Edit: November 11, 2008, 07:17:56 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag Ceramic cooktop board repair tips
« Reply #2 on: November 12, 2008, 06:52:34 PM »
If you replaced the Bake Element and it still won't work, it's usually the Bake Relay on the Board.
If you can find one and replace it...
After leaving this Earth, "Do you want the smoking or non-smoking section?"