Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Washer - nothing happens  (Read 95 times)

Offline gtr

  • VIP Member
  • Member Since: Aug 2018
  • Posts: 12
GE Washer - nothing happens
« on: March 22, 2019, 02:38:32 PM »

Hey everyone!! Working on a GE Washer Model# GTW490ACJ3WW and when you select a cycle and the lights come on ok but when you push to start the lights go out and nothing happens---- Board bad? or what do you think? cause I sure don't know!!! Thanks.........

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: GE Washer - nothing happens
« Reply #1 on: March 23, 2019, 03:51:19 AM »
Iím sure you already checked this, but with your meter attached, when you press start, does the voltage at the outlet drop to an unacceptable level.  I have chased one these all over the place.  The voltage at the outlet shows good until a valve or motor tries to start, then nothing.  Let us know how it turns out for you.  A quick and dirty test is to run a heavy extension cord to known good outlet.

Bearcat