Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Dishwasher leaving water bottom after wash ADW1000K00W  (Read 342 times)

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 248
GE Dishwasher leaving water bottom after wash ADW1000K00W
« on: March 16, 2019, 12:39:09 PM »

I changed impeller kit and seal.also sump.I clean everything.Pump may be weak?

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
« Reply #1 on: March 17, 2019, 05:35:56 AM »
Sound to me like you are missing the check ball, or itís installed incorrectly.  The part number if you need one is WD12X10408.

Write back, on how things turn out.

Bearcat

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 248
Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
« Reply #2 on: March 17, 2019, 07:21:34 AM »
Is the ball under spray arm.Just pull spray arm off,No tools needed?I order the ball already.I will let you know.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5134
  • Country: us
Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
« Reply #3 on: March 17, 2019, 09:29:22 AM »
That model does not uses that check ball!   Check to see if the water is slowing draining into the sink after it starts to wash!     Also is it getting enough water in the fill cycle!  This model uses the weight of the water to keep that flapper open after the drain solenoid is energized.

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 248
Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
« Reply #4 on: March 17, 2019, 02:37:29 PM »
I am testing out side with water hose.