Bad vibration/Shake during spin cycle. Diagnostic Code FE41: washer out of balance
Washer shakes during spin both when empty or with clothes
Washer less than 2 years old but has been overloaded frequently
What I have tried so far:
New Whirlpool Certified Parts Suspension Rod Kit ($79.) Originals were green plastic, new
ones are green plastic. No difference in vibration after install of new rods
Leveled and Re-Leveled Washer on concrete slab floor
Checked belt and pulley
Checked for foreign object tub/basket
Placed heavy rubber 5/8" thick vibration mat under washer
Plastic feet are screwed in all the way, rear feet are not self-leveling
What am I missing here?
Thanks for any help.