Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Top Load Washer - Dreaded Bad Lower Bearing  (Read 162 times)

Offline Choice ApplianceCentralIN

  • VIP Member
  • Member Since: Feb 2019
  • Posts: 1
GE Top Load Washer - Dreaded Bad Lower Bearing
« on: February 16, 2019, 09:07:14 PM »

Hello. Im new to this forum. I currently operate a very small repair/resale washer & dryer company in central Indiana. It's just myself & 1 other co-worker/partner at this time so I am still learning about some common problems.
Previously we wouldnt even touch GE washers (neither the traditional style nor the hydrowave style) because I knew that it wasnt cost effective to replace transmissions/mode shifters when the bearings got bad. I am experimenting with a repair procedure that would essentially bring the cost down to 1 hour or so of my time & a $5 bearing.
So far I have been able to successfully repair the non-hydrowave, older transmission where the lower bearing is mounted on the rotor for the brake assembly. I haven't done the newer mode shifter, yet.
Basically I'm just posting to see if any of you here have any tips, suggestions or have possibly perfected a procedure yourself? Especially concerning the newer models with the mode shifter apparatus & common faults associated with it.
I understand I am servicing supposedly "unserviceable" parts but I am very mechanically inclined & I like to know exactly what the culprit is & why it failed when repairing anything.

Offline OMG

  • Technician
  • Member Since: Nov 2017
  • Posts: 90
Re: GE Top Load Washer - Dreaded Bad Lower Bearing
« Reply #1 on: February 26, 2019, 10:07:32 PM »
I never have but I'd be interested in learning how as I have had to sraoe quite a few of these machines due to the bearing issue.