Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Cabrio Washer skips to end of cycle  (Read 478 times)

Offline Dt13579

  • VIP Member
  • Member Since: Sep 2018
  • Posts: 16
Whirlpool Cabrio Washer skips to end of cycle
« on: February 16, 2019, 06:10:41 PM »

Hello,

I have come across this issue where the normal cycle starts fine and and when it reaches 29 mins the time jumps to 4 mins and the washer drains/spins and ends cycle. I have already tried replacing the main board. Any help would be greatly appreciated. MOD WTW6700TW1
« Last Edit: February 16, 2019, 06:23:43 PM by Dt13579 »

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #1 on: February 17, 2019, 12:44:31 PM »
Are you getting a OL oe UL error code at the end of the cycle?

Offline Dt13579

  • VIP Member
  • Member Since: Sep 2018
  • Posts: 16
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #2 on: February 17, 2019, 02:07:27 PM »
No error at all... it just ends as if it completed the cycle.

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #3 on: February 17, 2019, 02:10:22 PM »
Do you know how to go into diagnostics on the control and see if there are any error codes stored there?

Offline Dt13579

  • VIP Member
  • Member Since: Sep 2018
  • Posts: 16
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #4 on: February 17, 2019, 02:28:15 PM »
I normally easily go into diagnostic on any whirlpool appliance but this one didn't have any instructions on running a diagnostic. I am subscribed to service matters but could not find anything useful for this model. Any tips?

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #5 on: February 17, 2019, 02:42:51 PM »
If you can access service matters type in W10026628 in search box for the tech sheet.  Also, for a tip, if you donít find what you are looking for on service matters, try dropping the last 3 letters/digits in the model number.  If you need more help, or if you get it fixed, let me know what happened.

Offline Dt13579

  • VIP Member
  • Member Since: Sep 2018
  • Posts: 16
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #6 on: February 17, 2019, 02:49:54 PM »
Okay, that's a great tip. I'll have to try it this week at the customer's place. Have you ever come across an issue like this where it skips through the cycle and no error comes up?

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #7 on: February 17, 2019, 03:01:08 PM »
Without knowing about the error codes, I would just be guessing.  But, if your error codes do show F70, or F72, I would be looking at suspension shocks (spring hangers ), or friction ( rust ) on transmission shaft, preventing basket moving freely.  If this was a dryer, I would just say the time in the display is estimated.

Offline Bearcat

  • Technician
  • Member Since: Jan 2019
  • Posts: 78
  • Country: us
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #8 on: February 17, 2019, 03:03:33 PM »
Also might try it with an extra rinse option, or fabric softener added option, and see if you get same results.

Offline noyesappliancerepair

  • Technician
  • Member Since: May 2018
  • Posts: 41
Re: Whirlpool Cabrio Washer skips to end of cycle
« Reply #9 on: April 02, 2019, 06:03:01 PM »
most likely thrust bearing is stuck; when that happens it will skip cycles causing all kinds of issues;