Hi All new to forum.
I have a WSF26C3EXF01 Whirlpool fridge.
The Ice maker stopped and will not make Ice.
I have replaced the 2 optics boards in the ice maker door. Red led comes on for 10 minutes then goes out.
I have replaced the Ice maker still no Ice. (not getting Ac volts on the connector pins 1 and 2 to the icemaker on door
r.I have replaced the main control board (Used)
Checked the voltage on the main control board P3-3 to P1-1 and no Ac voltage.
I did a voltage check on the main control board see attached.
first column red is old board and second column red is new board. Same results same voltage.
Water dispenser works
Also took of cover to Icemaker module and checked L and N for voltage and no ac volts.
Put jumper wire in T and H nothing no icemaker movement
So I'm not getting ac voltage on the main board P3-3 and P1-1.
Can someone help before I dump this fridge.
Its just 5 years old and have had 4 service calls when under warranty that ran out this past may.