Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Tub Seal Part # needed for #417.43142200  (Read 252 times)

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 678
  • Country: us
    • Buy me a beer through paypal
Tub Seal Part # needed for #417.43142200
« on: January 14, 2019, 07:53:12 AM »

 Anyone happen to have the part number for a Frigidaire front load washing machine model number 41743142200 please let me know I know this is part of the outer shell but just need the replacement tub seal only

Offline manden

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 236

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 678
  • Country: us
    • Buy me a beer through paypal
Re: Tub Seal Part # needed for #417.43142200
« Reply #2 on: January 14, 2019, 12:43:47 PM »
No itís the rear tub seal that houses the bearings - canít find part number

Offline manden

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 236
Re: Tub Seal Part # needed for #417.43142200
« Reply #3 on: January 15, 2019, 05:41:46 AM »
The following is all I could find.

https://www.yellowvanhandyman.com/washerrepair.aspx

Offline Blaiser

  • Technician
  • Member Since: Jun 2011
  • Posts: 678
  • Country: us
    • Buy me a beer through paypal
Re: Tub Seal Part # needed for #417.43142200
« Reply #4 on: January 15, 2019, 07:30:34 AM »
Thank You was trying to see if there was a part number just for that seal.  Iíll call company and see if I can get seal only more than likely itís proprietary!


Offline jeff5may

  • VIP Member
  • Member Since: Oct 2014
  • Posts: 19
Re: Tub Seal Part # needed for #417.43142200
« Reply #5 on: February 18, 2019, 11:25:31 AM »
I'm pretty sure the bearing and seal kit you're after is the same one as a Whirlpool duet, like the wfw9200. Bearings are 6306 and 6307. If you get a knockoff kit, the seal will most likely have the dimensions on its pouch. If you get authorized parts, it won't. Fwiw, it doesn't really matter because if you need bearing replacement you need a seal. If you're repairing dozens at the lowest possible cost, and can source a super cheap seal in bulk, it might make economic sense. I wouldn't bother.
« Last Edit: February 18, 2019, 11:34:46 AM by jeff5may »