Author Topic: Topload GE washer kicks clothes to one side (Read 1853 times)

Matzie66 · « **on:** December 28, 2018, 07:50:01 PM »

Washer is a topload GE # MTW200BMK0WW.On sensing then when it starts to take in water unit will kick the clothes to one side.
Usually sensing is gentle motions back& forth.

geno875 · « **Reply #1 on:** December 29, 2018, 12:46:22 PM »

I have seen these machines have bad control boards and doing some strange stuff in sensing.

Matzie66 · « **Reply #2 on:** December 29, 2018, 03:17:47 PM »

Hi
Mabe suggested replacing transmission & spin tub.Do you think a bad tranny would cause the rough
motion at the start of rinse fill?

geno875 · « **Reply #3 on:** December 30, 2018, 03:04:40 PM »

Is this similar to your issue?

https://www.youtube.com/watch?v=BI7Qta-iYOQ

Matzie66 · « **Reply #4 on:** December 30, 2018, 08:25:56 PM »

No, this one will kick at the start of rinse when water just starting to come in.Of course then because clothes are bunched up, washer will fill with
water but unit remains with unbalanced load.Its a rare complaint to me.

olyteddy · « **Reply #5 on:** January 01, 2019, 08:17:51 PM »

Is the machine level?

Matzie66 · « **Reply #6 on:** January 01, 2019, 10:43:32 PM »

Yes machine is level. Floor is okay.Problem has to be right in washer itself.Has to be something that is causing a forceful power
to gearcase for start of rinse cycle.Its a fast/short whipping motion of agitator. One place suggested replacing gearcase & spin tub. Another the
motor sensor.

victorlaynes · « **Reply #7 on:** January 05, 2019, 10:34:30 PM »

that is seem rhe transmission is lock.

Matzie66 · « **Reply #8 on:** January 15, 2019, 07:41:49 AM »

Hi
Customer had another serviceman check washer.Said water line clogged & unit working fine.
Hard to believe??? I too think its tranny problem. Thanks a mill for your info.

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum